Skip to content

DIY Build

To build a breadboard WiFiCom, see Parts List and Breadboard Layout.

Supported Boards

WiFiCom

  • Raspberry Pi Pico W

Note: Arduino Nano RP2040 Connect, RP2040+AirLift, and screenless WiFiComs are only supported up to WiFiCom firmware v1.x, and will act as screenless P-Coms in v2.x.

P-Com (USB serial connection only)

  • Raspberry Pi Pico
  • Seeed Xiao RP2040
  • Other RP2040 boards are likely to work, but you will need to define pins in board_config.py

Note: Screen output on P-Coms is only supported up to WiFiCom firmware v1.x.

Schematic

Schematic PDF (includes some info for PCB making)